<samp id="lqahh"></samp><ruby id="lqahh"><li id="lqahh"></li></ruby>
<track id="lqahh"></track>
  • <ol id="lqahh"></ol>




      Technological innovation Professional services
      6 record 1/1 page
      Product overview
      Multi-arc ion coating machine is a newly developed vacuum ion coating technology in recent years. The ion coating technology using arc discharge principle under vacuum state is the first vacuum coating method developed. It has the advantages of high deposition rate, firm bonding, stable equipment operation, etc. On the basis of the traditional multi-arc, our company has made strict improvements and designs on the target sealing structure, magnets, cooling, etc., which has increased the ionization rate, refined the particles, and the film layer and the substrate are firmly bonded, and the film layer is more dense. Improved hardness and wear resistance, suitable for plating decorative films such as golden titanium nitride, black titanium carbide, colorful titanium oxynitride, etc., and can also be coated with anticorrosive touch film (such as AL, Cr stainless steel and TIN, etc.) and wear resistance Membrane. The film layer is firmly combined with the substrate, which is suitable for watches, hardware, tableware, and tools and molds that require wear resistance and superhardness. It has good development prospects.

      Technical parameter
      Device model VLT-800 type VLT-1000 type VLT-1200 type
      Coating room size 800×1250 1000×1200 1200×1500
      Ultimate vacuum ≤4×10-4pa
      Pump down time 從大氣抽至6.6×10-2Pa<10min
      Arc source 6 (2KW/piece) 8 (2KW/piece) 6 (2KW/piece)
      DC negative bias 0-1000V 10A
      0-500   20A
      0-1000V 12A
      0-500   25A
      0-1000V 20A
      0-500   30A
      Workpiece size 6 axis (220×800) 6 axis (250×1000) 6 axis (280×1300)
      Heating power 15KW 20KW 25KW
      Total power/average power 40KW/25KW 50KW/30KW 58KW/35KW
      Magnetron target (planar or cylindrical target) 10KW 15KW 20KW
      Gas mass flow controller Three way Three way Three way

      Equipment characteristics
      Production period: the production period is short -270sec/1 the same period (conditions for dry products without a large amount of outgassing)
      Coating material: universally used for various metal coatings (aluminum, nickel, copper, chromium... and other metal materials)
      Coating method: metal sputtering coating, uniform film thickness distribution
      Coating quality: high brightness, strong adhesion
      Coating speed: two 20Kw high-power magnetically controlled sputtering motors, the power can be adjusted to control the coating speed
      Dehumidification capacity: The vacuum chamber is equipped with a low temperature refrigeration system below 140 degrees, which fully absorbs moisture to increase the vacuum reach speed
      Operating expenses: The sputtering electrode is a self-developed product, which greatly improves the use efficiency of the target material
      Occupy the ground finely: loading and unloading at a fixed position requires only a small operating space
      Operation method: The man-machine interface can be set and monitored intuitively, and the person who has no management password can not change it
      After-sales service: There is an after-sales service center and parts warehouse, which can quickly deal with problems in use

      Equipment principle diagram
      In a suitable vacuum environment, connect the high-voltage power supply to establish a low-pressure gas discharge low-temperature plasma zone between the evaporation source and the substrate. The substrate electrode is connected to a DC negative high voltage to form a glow discharge cathode, and the plating material vaporizes atoms. Entering this area collides with inert gas ions and electrons, and the ionized ions and gas ions bombard the surface of the coating with higher energy, depositing the evaporate or its reactants on the laminate.

      Schematic diagram of ion plating